Water Pumps

Water Pumps

Borehole Submersible Turbine Pumps 

Fab water engineering is able to supply submersible turbine pumps in a variety of materials including cast iron and stainless steel. These turbine pumps can pump fresh and saline water with 150grams of sand per 1000 l . The submersible turbines are able to pump to heads of 850m at flows up to 2000m/cube. We are also able to supply submersible turbine pumps for horizontal pumping conditions. All these pumps are available in DOL and Star delta configurations with varying voltages. Larger for special applications.

Turbine Pumps

Vertical turbine pumps are supplied for deep well applications with high flow expectations. Fab water engineering can supply diesel or electrically powered vertical turbines with a variety of depth and flow options. The pumps are available from 5” to 18” configurations with water or oil lubricated bearings. Larger for special applications.

Submersible Borehole Pumps

Fab water engineering can supply a variety of submersible pumps for domestic, industrial, agriculture and general purposes. These pumps are mainly 100mm in diameter with flows of up to 24m/cube per hour with heads of up to 350m. The borehole pumps are constructed from a variety of materials mainly stainless steel. The pump motors are available in single or three phase DOL configurations 230v and 400v.

Helical Rotor Pumps

Fab water engineering supply helical rotor pumps to areas where there is no electrical power available. These pumps can also be used in deep boreholes or where high heads are required. Helical rotor pumps are available to flows up to 100m/c per hour and heads up to 700m.

Centrifugal Pumps

Fab water engineering supply close coupled centrifugal pumps with flows up to 3000m/c and heads of up to 1000m . The close coupled pumps are available in three phase DOL and star delta. We also can supply bare shaft pumps in a variety of configurations powered by diesel or electric motors as pump sets or modular. The bare shaft range is available with flows exceeding 1000c/m and heads to 200m.

Booster Pumps

Fab water engineering supply a variety of booster pumps for domestic, commercial and industrial applications. The booster pumps are available with flows of up to 120000l/h and heads of up to 180m. Booster sets from 0.25kw to 80kw are available in single phase and three phase. We can build booster sets for any application requiring constant reliable pressure.

Plunger Pumps

Plunger pumps are extremely high pressure pumps designed for pressures of 800bar. These pumps are used in industrial and mining operations. Plunger pumps are built according to the requirements of the application. The pumps are available to 750kw.

Pool and Miscellaneous Pumps

Fab water engineering supply pumps for domestic and commercial pools. The pool pumps are available from 0.45kw to 20kw. These pump are self priming and can pump saline water. The pool pumps are available in single and three phase. We have a variety of pumps for sewage and sump applications, also included are chemical dosing pumps.

Miscellaneous Fountain Pumps

A variety of small to large fountain pumps, available as submersible and dry type units. A full line of water treatment equipment is available for all types of fountains and ponds including the ornamental fish industry.

Miscellaneous Fire Equipment

Miscellaneous fire equipment Fab water engineering supply a full line of fire protection pump equipment. The pumps are available with electric or diesel motors. Included in our fire equipment range are fittings, valves and hoses.

Miscellaneous Pool Equipment

Fab water engineering provides a complete range of pool equipment for the domestic and commercial markets. Included in this range are pumps, pipe, filters, chlorinators and cleaning equipment.

Electrical Controls

A full range of control panels built to each systems requirements are available. The panels are available up to 2000kw in single and multiple pumps, manual and fully automatic with the latest electronic instruments. We also supply and build VFD pump panels with full electronic control.

P Series - Vertical Lineshaft Pumps

P series vertical lineshaft pumps, respected for their modern construction philosophy and flexibility of application, constitute a culmination of the experience accumulated by CAPRARI in more than

Oxy-Flow Aeration Assembly

OXY-FLOW is a valid answer when it comes to oxygenation and homogenizing in systems that treat sewage from civil, industrial and animal breeding complexes, aquiculture or aerated lagoon systems, with low investment and running costs.

Level-Start - Air-Operated Level Gauge

Level gauge mod. Level-Start has been designed to monitor the activation level of electric pumps installed to raise the waste water produced in urban and industrial areas and animal and breeding farms.

KCT+ / KST+ Series - Electric Pumps with Shredder

KCT+ / KST+ series electric submersible pumps with shredders are able to raise water containing solid or fibrous matter from housing estates, detached houses, camp-sites, hotels, filling stations, supermarkets, farms, food preserving industries, paper-mills and whenever solids in suspension must be shredded.

KC+ / KS+ Series - Electric Submersible Pumps

KC+ / KS+ series electric sewage pumps are Italian technology's answer to the need to protect water and the environment from the degradation caused by the convulsive development of our industrial society. 

K-Kompact Series - Dry Installed Sewage Electric Pumps

CAPRARI's K-Kompact series pumps incorporate the very latest technology and are the result of constant investment in research and development. K-Kompact pumps are designed and made to handle residential and industrial waste waters.

ENDURANCE - Stainless Steel Electric Mixed Flow and Radial Submersible Pumps

The new ENDURANCE series features DEFENDER, a smart device designed, tested and patented by Caprari to protect the electric pumps from electrochemical corrosion and galvanic currents, passivating the stainless steel so as to create a further safety barrier. 

Electric Submersible Booster Pumps

Electric submersible booster pumps are the ideal solution in all those cases where it is essential to eliminate all the critical aspects concerning plant, environment, and maintenance requirements in applications involving traditional solutions; i.e. electric pumps with horizontal shaft.

Stainless Steel Submersible Electric Pumps

The main feature of the radial wet end is that high operating pressure values are reached. The reason for this is that the limited axial size of the hydraulic components allows wet ends with a high number of stages and a short overall length to be constructed. This guarantees an adequate support for the rotating parts.

E4XP Series - Electric Stainless Radial Submersible Pumps

In a class of their own, E4XP pumps have a precision cast stainless steel structure to guarantee lasting performance even in the most critical applications, such as particularly aggressive and/or abrasive waters.